Details
Quamar Lower Burr Carrier Bolt (8 x 16 mm)
Lower burr carrier bolt for the old Quamar T48 and T80 (Fiorenzato MS) grinders. Sized close to an M8 but cut with a 22 TPI / metric 1.25 pitch, and critically, it's a left-hand, reverse thread, a detail that trips up a lot of techs the first time they pull one of these grinders apart.
SPECIFICATIONS
- Thread: ~M8, 22 TPI / 1.25 metric pitch, left-hand (reverse) thread
- Drive: 17 mm wrench or socket
COMPATIBILITY
- Fits: Quamar T48, T80 (Fiorenzato MS) grinders, lower burr carrier
INSTALLATION
Straightforward with a 17 mm wrench once you know the thread direction, DIY for anyone comfortable pulling a lower burr carrier.
PRO TIPS
- Left-hand thread: turn clockwise to loosen and counterclockwise to tighten. Forcing it the "normal" direction is the most common way this bolt or the carrier gets damaged.
- No longer available from the manufacturer, stock on hand is limited, so don't round it off testing the thread direction.
Customer Reviews
Attention CA Residents: Prop 65 Warning
WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.