For Rancilio users, may we recommend upgrading to the new version valve assembly? It is a semi-challenging remove and replace procedure, but the parts for the old version are slowly being phased out anyway, so...
Steam wand replacement for Rancilio Silvia Espresso Machine. May require two o-rings that are not included.
Although we are aware of people using the Rancilio Silvia steam wand (our item R_1054) for retro-fitting the wand in the Gaggia units, working primarily with commercial cafe equipment, it's not something we have any experience with, and so cannot make any technical recommendations on this retro-fit
Ratings & Reviews
No. of ratings: 17 |Number of Reviews: 30
Santa Fe, NM 2013-10-21
I ordered this component to replace the stock steam wand on my Gaggia Classic in order to make microfoam. It was a very easy modification
Iligan City, - 2013-10-07
Perfect replacement wand for my Gaggia Classic. Didn't even need the extra O-rings that I bought. For months I couldn't get decent froth for latte art with the Gaggia's Pannarello wand. After a week with the Silvia wand, at least I can form basic rosetta patterns, even how primitive at this stage.
Saint Petersburg, FL 2013-08-27
I got this for my Gaggia Calassic. It was an easy change ou with no modifications and works great.
Applegate, CA 2013-07-09
Works great on Gaggia Classic No sanding required, just swap out the nut and you're done.
Ventura, CA 2013-06-28
I have an old "Gaggia Coffee." I bought this wand to replace my original equipment steaming wand, which was not long enough. The process was not difficult, but the steam hole in the new wand is too big. I have a solution, but others may or may not like it. With the new Silvia wand, too much steam comes out, and the milk heats up before I have created enough foam. It's high quality microfoam, but once the milk heats up, you can't make any more. So I bought a 1st-line steam tip. It has three very small holes, and screws right into the Silvia wand. But the holes point out at an angle, and when I used it, only one hole generated microfoam. The other two holes warmed up the milk, but did not contribute much to foam generation. Undaunted, I cut off the tips of a round toothpick and plugged up two of the holes. Now I have a one-hole steam tip on my frothing wand. It's a very small hole. I can get tons of high quality microfoam without overheating the milk. The toothpick ends fell out, but the holes stayed clogged up. They get sterilized every time I make a cappuccino. All is good. However, I regret the whole thing. I wish I had just bent my original Gaggia wand so that it would fit deeper into my frothing pitcher.
Fairview Park, OH 2013-04-01
This wand worked perfectly as an upgrade from the panarello wand on my KitchenAid Pro Line dual boiler espresso machine. I can make really good latte art now Thanks Espresso Parts for a great product at a great price. You guys rock
HongKong, - 2013-02-17
Work perfectly fine with my gaggia classic, just take reference to old post/ youtube how to replace the original one. Whole pro endure could be completed in 15 mins
Santa Ana, CA 2013-01-10
perfectly fit on my gaggia evolution. far better than stock wand. milk frothing is easy. Highly recommended. just unscrew the bolt of stock wand and bend the wand and slide out the bolt and place it to new wand and screw. be careful while screwing don't twist the copper tube inside the machine...
Wellington, FL 2013-01-07
It was a perfect fit for my Gaggia Evolution. I use the original nut that came with the machine and you don't need to order any O-ring. No need to open the machine either.
Chandler, AZ 2013-01-06
Like many others, I used this to replace the stock wand on my Gaggia Classic. It was easy to replace and works great
FOLSOM, CA 2012-12-26
This was a great fit to replace the steam wand on my Gaggia Classic. I didn't even need to make any adjustments or file down any metal interface parts. All that was needed was to slightly bend the neck on the existing Gaggia Classic wand, so the nut could be easily slipped off for reusing to connect this new Silvia wand.
Yong in si, Kyunggi, - 2012-12-17
perfect fit on my gaggia pure. Great~~
El Paso, TX 2012-11-27
Perfect fit on my gaggia classic after changing out the nut
Princeton, NJ 2012-11-27
Used this to upgrade the frothing wand on a new Gaggia Classic. (retrofit) Fits perfectly (remove the nut from the Gaggia wand, and replace the nut on the Silva wand. Then screw onto the Classic. works great
Cambridge, MA 2012-10-27
works great on my Gaggia Evo w/o mod other than swapping the nuts. :)
Hong Kong, - 2012-10-26
It works great with my Gaggia Classic, it just needs a little modification to replace the original wand. BTW, brilliant service from EP team - goods is well packed, arrived safety and timely. Perfect
Stafford, VA 2012-10-26
Exact replacement for my Gaggia Classic. Very easy installation. Works GREAT
Kalamazoo, MI 2012-10-14
In the pursuit of creating "microfoam" with my Gaggia Classic, I replaced the stock steam wand with the Rancilio Silvia steam wand. It was no problem to fit the Silvia wand to the Classic. Took about 5 minutes. There's definitely a learning curve to create good foam. I've been at it about 2 weeks with the new steam wand and am starting to get good results.
San Diego, CA 2012-09-04
Replaced the factory original on my Gaggia Classic and it works great Good froth takes practice, but once learned micro-foam becomes a no brainer.
Burlington, NJ 2012-07-30
RANCILIO SILVIA STEAM WAND has been installed and works flawlessly The price,service, and shipping are second to none. These guys are so cool, they even threw in a free pin and two stickers...Thanks
CHUNG - I
SAMUTPRAKARN, - 2012-07-20
It works great with my Gaggia new baby dose...just take out the screw connector of this wand and pull out original one then insert this steamwand in, done fast replacement
Pasadena, CA 2012-05-12
SAINT PAUL, MN 2012-04-21
Direct replacement on my Gaggia Baby Class. Haven't used it enough to say if it's better than what came on the machine, but as an FYI for others it was a direct replacement. The tip where it connects is the exact same length and diameter. No modifications whatsoever needed.
SEOUL, - 2012-02-24
A present for my Gaggia. Good price, Great Product
oklahoma city, OK 2012-02-09
Works great on my Gaggia Classic Far better than the Stock wand Nice micro foam
Seoul, - 2012-02-07
it's good for my Gaggia. Works great.
Camas, WA 2011-06-22
It was an easy install on my Gaggia Classic. Worth the effort for sure.
Sanford, FL 2011-04-01
Perfect replacement part for my Rancilio Silvia. I like that it had the single hole, so now I have both the three hole tip and the one hole tip.
Chatsworth, GA 2011-02-15
Works great on the Gaggia Classic. With my PID its great.
Sheung Wan, Hong Kong., - 2011-01-20
Used for Gaggia Classic. It was very easy to install by just following the steps like thsese: http://www.youtube.com/watch?v=1hCcwmxj5lw
Rancilio Silvia Old Version Steam Wand