Details
Mazzer Doserless Conversion Spout Kit
This grocery-style spout kit converts a Mazzer Super Jolly (Normale) from doser to doserless operation, using a spring-loaded clip that holds a coffee bag under the chute for hands-free bulk dispensing. It includes the mounting hardware (2x M5 x 18mm socket hex screws, 2x M5 lock washers), best suited to bagging bulk-ground coffee rather than dispensing straight into a portafilter, since the spout sits too high and wide for that.
COMPATIBILITY
- Fits: Mazzer Super Jolly / Normale grinders
- Replaces: not compatible with older Major models or the Mini
- Works with: requires the MAZ_206 backing plate and MAZ_67 plate gasket to complete the conversion
INSTALLATION
This is a genuine retrofit, not a bolt-on kit, it requires precisely drilling and tapping two new mounting holes for the chute (Mazzer's factory Coffee Outlet Set, part S00SGRC01) and two smaller holes for the motor cover (Mazzer part SSJ0FRA04), so it's a job for an experienced technician with metalworking tools, not a countertop DIY swap.
PRO TIPS
- Drill only pilot marks first with a 7/32" bit, remove the chute to check placement, then finish through with an 11/64" bit and cut threads with a 5mm x 0.80 metric tap lubricated with dish soap and water, cutting oil is not recommended for this job.
- Remove the doser's spring-loaded bag clamp before starting; it's not used once you're single-dosing into bags and will only get in the way of the new spout.
Customer Reviews
Attention CA Residents: Prop 65 Warning
WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.