Backflush. (Each group)
1. Insert blind filter in portafilter and add up to 1/2 teaspoon (3 g) of Espresso Parts Cleaning Powder. Insert porta-filter into group head.
2. Activate brew cycle for 10 seconds. Stop 10 seconds. Repeat 5 times.
3. Remove portafilter. Activate brew cycle and rinse porta-filter in stream of water from group head. Stop cycle.
4. Insert portafilter into group head. Repeat step (2) without detergent 5 more times.
5. Make and discard a cup of espresso to ensure no residue remains.

Soak.
1. Soak filters and metal of porta-filter for 30 minutes in 1 teaspoon (6 g) of Espresso Parts Cleaner per 32 oz. (1 L) of hot water.
2. Rinse with clean hot water.

Cleaning Spray.
Want to clean drip and drain trays, steam wands, espresso machine panels, or clean up the outside of your espresso grinder?
Mix four tablespoons of Espresso Parts Espresso Machine Cleaner to 1 quart of hot water in a spray bottle. Mist parts heavily with solution, and wipe clean. Some parts may require more than one application.

For Use on Coffee Brewers and Tea Brewers.
1. Empty coffee from equipment.
2. Sprinkle 1/2 teaspoon (3g) of Espresso Parts cleaning powder per 64 oz. (2L) of brewer capacity directly into brew. For determining exact measurements for your particular coffee brewer set ups see list below.
   - 2 to 2.5 Liter Airpots or Servers use 1/2 teaspoon (3g)
   - 3 Liter Airpots or Servers use 3/4 teaspoon (4.5g)
   - 3 Gallon Urns take 1 1/2 teaspoons (9g)
3. Run a full brew cycle into each carafe or urn and hold for 30 minutes.
4. Empty each vessel and rinse all parts with clean hot water or rinse clean by repeating cycle with only water.

TIP: Wet cloth with Espresso Parts Espresso Machine Cleaning solution and wipe down spray heads, then wipe clean. CAUTION: Solution may be very hot.

Roasted Coffee Storage Bins.
Mix ratio of 50 parts hot water to 1 part Espresso Parts Espresso Machine Cleaner. Mix hot water and cleaner in a large sink or Laundry tub. Dip storage containers for several minutes, open and close any lids or dispense mechanisms. Remove from cleaning solution and dip in tub of clean water. Use running water for final rinse. Air-dry or wipe with cloth.

Removable Coffee Roaster Parts.
Mix ratio of 30 parts hot water to 1 part Espresso Parts Espresso Machine Cleaner. Remove any parts from your roaster that can be cleaned by dipping or soaking. Mix hot water and Espresso Parts Espresso Machine Cleaner in a large sink or Laundry tub. Let roaster parts soak for several minutes. Rinse in tub of clean water. Use running water for final rinse. Dry and inspect all parts.

Non-Removable Coffee Roaster Parts.
Mix four tablespoons of Espresso Parts Espresso Machine Cleaner to 1 quart of hot water in a spray bottle. Mist parts heavily with solution, and wipe clean. Some parts may require more than one application.

Bagging Equipment.
Mix four tablespoons of Espresso Parts Espresso Machine Cleaner to 1 quart of hot water in a spray bottle. Mist hoppers, spouts, and any coffee contact surfaces thoroughly with solution. Wipe surfaces clean with sponge. Keep sponge clean by rinsing periodically in clean water.