Fluid-o-Tech Rotoflow Rotary Vane Water Pump
Parts Ship Free!
No coupon code needed. Just add to cart for free shipping!
This product usually ships same day.
Price Match Guarantee
We strive to offer the best pricing, request a price match here.
Standard brass body Rotoflow® (Fluidotech) brand clamp flange rotary vane water pump. Suitable for one and two group machines. The most common pump style used in commercial espresso machines. This pump is used in combination with the standard pump motor. Includes clasp. Will not fit all makes and or models (such as the La Marzocco GS3) because of the length, or Astra which use NPT threads..
- clamp connection
- flowrate 150 L/h (approx. 40 GPH)
- with balanced bypass
- fitting ø 3/8" GAS (BSP)
- N.S.F. approved.
"Every new pump manufactured by Fluid-o-Tech is guaranteed to be free of defects in workmanship and material when leaving the factory for a period of 12 months from the production date stamped on the pump’s housing, plus a period of 3 months to cover the warehouse and transit time, or for a period of maximum 15 months from the purchasing date to the product use. In no event shall this period exceed 15 months from date of original invoice.
Fluid-o-Tech will repair or replace at its judgement part or all of the product not conforming to this warranty. Fluid-o-Tech’s responsibility under this warranty is limited to the repair or replacement of defective equipment returned to us on a D.A.P. basis, providing that our analysis discloses that such part or parts were defective at the time of sale."
Espresso Parts Guarantee:
|PA0154AGANN0000||FLUID O TECH|
You may have to adjust the pressure with the little screw on the side. Screwing it in increases the pressure, out reduces it. Using two small wrenches back off the lock nut and adjust the brass fitting until your pressure gauge needle remains in the proper range when pouring a shot. Tighten the lock nut when done.
Exact replacement for my old pump in my Simonelli Mac Digit. Espresso shots are top notch now!
Had an issue with my old pump, where the pressure during pump operation would fluctuate by two bars of pressure - bought this to replace. Got excellent advice calling customer service to select the item, no issues installing, and now the pump pressure is rock-solid again. Pro-tip: spend the thirteen bucks to get the two pump fittings as well, instead of having to hassle with busting the old ones loose from the old pump to re-use, like I had to! Thanks, and happy 2019 everyone!
Installed it in a 2001 Astoria which had a Procon pump. The fittings worked fine. Fit on motor perfectly. The overpressure valve seems to come set pretty tight, so be prepared to adjust it.
Installed on a 2005 Rancilio Epoca S 2 group. This pump was easy to install and simple to adjust. It holds pressure very steady and to top it off, it is SO QUIET!