Everpure E-10, 10" Coarse Prefilter System
E-Series prefilters (previously clear - now black) are designed to increase the life of Everpure carbon water filters in areas with an unusual amount of dirt in the water. With a 10 micron (nominal) rating, the Everpure prefilter traps much of the dirt which contributes to scale buildup in ice makers, and clogs the delicate orifices of other water-using equipment.
The standard EC110 Cartridge is provided with each Model E10 Filter. It is rated at 10 microns nominally and has a more-than-adequate life when filtering water with "normal" or average dirt loads.
View the specifications sheet here.
APPLICATIONS AND FEATURES
Head has 3/4" female pipe threads (also includes reduction adaptor fittings for 1/2" FNPT or 3/8" FNPT) for inlet and outlet pipe connections: it is constructed of polypropylene. Dirt/Rust cartridges are graded density spool type, with synthetic materials.
Maximum Flow: 6.0 gpm (22.7 Lpm)
Qty. per Case: 1
Working Pressure: 10 - 125 psi (0.7 – 8.6 bar), non-shock
Max. Temp: 35 - 100°F (2 - 38°C)
Inlet Outlet Size: 3/4”
Operating Weight: 6 lbs
Shipping Weight: 4 lbs
H: 12.44” W: 5.16 D: 5.5”
Choose a mounting location suitable to support the full weight of the system when operating. Make sure to properly lubricate o-ring prior to use. Use 3/4" water line (optional reducer bushings included). Install vertically with bowl hanging down. Allow 2-1 ⁄2" (6.35 cm) clearance below the cartridge for easy cartridge replacement.
IMPORTANT: Always use a NSF approved pipe dope or PTFE plumbers tape at all thread connections.