Fetco
Series 6000 Twin 3.0 Gallon Brewer Product Information:
EspressoParts.com & Fetco® provide you with a wealth of information
below. If you would like to talk to somebody in person about equipment specifics
please call us at 1(800)459-5594 or email
us we are here to help you find the equipment that best suits your
needs.
*Dispensers
sold seperately. Shown with Luxus 3.0 Gallon Dispenser #LUX_TPD30.
The
Luxus Thermal Dispenser Category is located here.
ADVANTAGES OVER COMPETITION
Coffee Quality:
* Gravity dispense tube
allows for consistent water volume per brew.
* Elimination of periodic maintenance of corroded brew solenoids.
Gravity dispense tube locates above the water line when not in use thereby
resisting lime build-up
* Electronic controls are more reliable and accurate than mechanical
* Electronic thermostats, timers, and mercury relays provide the most reliable
consistency - - brew after brew
* Water is at "Brew" temperature during 100% of the brew
* Insulated LUXUS Thermal Dispensers maintain serving temperature without
warmers for extended periods
* Simultaneous brew settings of bypass and spray over can be set for two unique
volumes.
* Simultaneous brewing compared to one spray arm. Better burst capacity.
Safety:
* Brew basket is
locked down during the brew cycle with a safety latch.
* Twist lock covers provide
leak-proof protection during transportation and ease of handling
Ease of Installation:
* No need to turn
down the thermostat during initial fill cycle, because the brewer will not begin
to heat until the tank is full of water.
* Thermostat provides +1
/ -2 degrees of accuracy minimizing initial calibration
* All FETCO brewers are
tested and pre-set at the factory for temperature and water volume, expediting
the installation process.
Serviceability:
* Commonality of parts
provide for reduced spare parts inventories as well as truck and warehouse
space
* Ball valve drain provides
the safest and most efficient way to drain the brewer on the market.
* Top mounted heating
elements means faster changing of the elements no need to drain the entire
tank.
* Mercury relays need
less periodic replacement than open air contactors.
Download
Fetco Series 6000
Cutsheet
Download
Fetco
Series 6000 User
Guide
Download Fetco
Series 6000 Training
Guides
Download Fetco Series
6000 CAD Drawing - PDF
Fetco's Coffee Brewing Training
Videos. (Windows
Media Format)
Low
Res (2.0 MB) | Hi
Res (5.0 MB) | High
Speed, DSL, Cable Modem (15.0 MB)
Fetco
Series 6000 Twin 3.0 Gallon Brewer Technical
Data
Brew Volume:
Full Batch - 3.0 gal. (11.4 liters)
Half Batch - 1.5 gal. (5.7 liters)
Average Brew Time:
Full Batch - 5-5.5 minutes
Half Batch - 2.5-2.75 minutes
Water Temperature:
205° (factory setting) Inside Water Tank
195°F plus or minus 5° at spray head
Coffee
Amount:
12-24 oz. (Follow your coffee supplier's recommendations)
Coffee
Filters:
20" X 8" - standard
18" X 7½" - optional half batch
Bypass Range:
0 to 33% of brew volume
(factory set at 0% unless specified)
Water
Requirements:
20-75 psig
2 gpm cold or hot water
3/8" male flare fitting is provided
Electrical:
See chart below. Cord & plug is provided only with 120V versions. Consult
local electrical codes for wiring other versions.

|