EspressoParts.com & Fetco® provide you with a wealth of information below. If you would like to talk to somebody in person about this equipment please call us at 1(800)459-5594 or email us we are here to help you find the equipment that best suits your needs.

Fetco® Series 6000 CBS 61H Product Information:

*Dispensers sold seperately. Shown with Luxus 3.0 Gallon Dispenser #LUX_TPD30. The Luxus Thermal Dispenser Category is located here.

ADVANTAGES OVER COMPETITION

Coffee Quality:

* Gravity dispense tube allows for consistent water volume per brew.
* Elimination of periodic maintenance of corroded brew solenoids. Gravity dispense tube locates above the water line when not in use thereby resisting lime build-up
* Electronic controls are more reliable and accurate than mechanical
* Electronic thermostats, timers, and mercury relays provide the most reliable consistency - - brew after brew
* Water is at "Brew" temperature during 100% of the brew
* Insulated LUXUS Thermal Dispensers maintain serving temperature with out warmers for extended periods

Safety:

* Brew basket is locked down during the brew cycle with a safety latch.
* Twist lock covers provide leak-proof protection during transportation and ease of handling

Ease of Installation:

* No need to turn down the thermostat during initial fill cycle, because the brewer will not begin to heat until the tank is full of water.
* Thermostat provides +1 / -2 degrees of accuracy minimizing initial calibration
* All FETCO® brewers are tested and pre-set at the factory for temperature and water volume, expediting the installation process.

Serviceability:

* Commonality of parts provide for reduced spare parts inventories as well as truck and warehouse space
* Ball valve drain provides the safest and most efficient way to drain the brewer on the market.
* Top mounted heating elements means faster changing of the elements no need to drain the entire tank.
* Mercury relays need less periodic replacement than open air contactors

Download Fetco Series 6000 Cutsheet

Download Fetco Series 6000 User Guide

Download Fetco Series 6000 Training Guides

Watch Fetco Training Videos:
(Low Res 2.0 MB) | (High Res 5.0 MB) | High Speed Connection/DSL/Cable Modem (15.0 MB)

Download Fetco Series 6000 CAD Drawing - PDF | DWG

Technical Data

Brew Volume:
Full Batch - 3.0 gal. (11.4 liters)
Half Batch - 1.5 gal. (5.7 liters)

Average Brew Time:
Full Batch - 5-5.5 minutes
Half Batch - 2.5-2.75 minutes

Water Temperature: (factory setting)
205°F inside water tank
195°F plus or minus 5° at spray head
(Boiling point/altitude chart)

Coffee Amount: (Follow your coffee supplier's recommendations)
12-24 oz.

Coffee Filters:
20" X 8" - standard
18" X 71⁄2" - optional half batch

Bypass Range:
0 to 33% of brew volume
(factory set at 0% unless specified)

Water Requirements:
20-75 psig
1 gpm
cold or hot water
3/8" male flare fitting is provided

Electrical:
See chart below. Cord & plug is provided only with 120V versions. Consult local electrical codes for wiring other versions.