EspressoParts.com & Fetco® provide you with a wealth of information below. If you would like to talk to somebody in person about this equipment please call us at 1(800)459-5594 or email us we are here to help you find the equipment that best suits your needs.

Fetco CBS 51H Product Information:

ADVANTAGES OVER COMPETITION

Coffee Quality:

* Gravity dispense tube allows for consistent water volume.
* Elimination of periodic maintenance of corroded brew solenoids. Gravity dispense tube locates above the water line when not in use thereby resisting lime build-up.
* Electronic controls are more reliable and accurate than mechanical.
* Electronic thermostats, timers, and mercury relays provide the most reliable consistency - - brew after brew.
* Water is at "Brew" temperature during 100% of the brew
* Insulated LUXUS® Thermal Dispensers maintain serving temperature without warmers for extended periods

Safety:

* Brew basket is locked down during the brew cycle with a safety latch.

Ease of Installation:

* No need to turn down the thermostat during initial fill cycle, because the brewer will not begin to heat until the tank is full of water.
* Thermostat provides +1 / -2 degrees of accuracy minimizing initial calibration.
* All FETCO® brewers are tested and pre-set at the factory for temperature and water volume, expediting the installation process.

Serviceability:

* Commonality of parts provide for reduced spare parts inventories as well as truck and warehouse space.
* Ball valve drain provides the safest and most efficient way to drain the brewer on the market.
* Mercury relays needs less periodic replacement than open air contactors.

 

Download Fetco Series 5000 Cutsheet

Download Fetco Series 5000 User Guide

Download Fetco Series 5000 Training Guides

Watch Fetco Training Videos:
(Low Res 2.0 MB) | (High Res 5.0 MB) | High Speed Connection/DSL/Cable Modem (15.0 MB)

Download Fetco Series 5000 CAD Drawing - PDF | DWG

Fetco 5000 Series - CBS 51H Techincal Data

Brew Volume:
Full Batch - 1.0 gallons (3.8 liters)
Half Batch - 0.5 gallons (1.9 liters)

Average Brew Time:
Full Batch - 23¾ 4-3 minutes
Half Batch - 1½ minutes

Water Temperature: (factory setting)
205°F inside water tank
195°F plus or minus 5° at spray head
(Boiling point/altitude chart)

Coffee Amount: (Follow your coffee supplier's recommendations)
4-12 oz.

Coffee Filters:
13" X 5" - standard
15" X 5 ½" - optional larger size

Water Requirements:
20-75 psig
1⁄2 gpm cold or hot water
3/8" male flare fitting is provided

Electrical:
See chart below. Cord & plug is provided only with 120V versions. Consult local electrical codes for wiring other versions.