Includes both burrs and screws

Fits the GR1.2, GR1.3, GR2.2 and GR2.3 grinders

64mm Outside Diameter x 38mm Inside Diameter, three hole, right hand rotation

One set of two Mahlkonig grinder burrs. Includes six (6) screws for installation.

Mazzer Kony Espresso Grinder Conical Burr Set. 63mm Outside Diameter. Conical burr

70mm x Outside Diameter x 40mm Inside Diameter, three hole, right hand rotation

THESE ARE TESTED BY GRINDMASTER PRIOR TO SHIPPINGReplacement burr kit for the following Grindmaster grinder models:100115115A115AB190SS250250-3A250A250AB495810810A810AS810S810T835835S375875875-S

63mm Outside Diameter x 38mm Inside Diameter, three hole, right hand rotation

64mm Outside diameter x 37mm Inside diameter, 9mm thick with a right hand rotation

64mm Outside Diameter x 37mm Inside Diameter x 9mm three-hole, left hand rotation

Replacement Grinder Burrs (Blades) for the Mini Mazzer Espresso Grinder. 58mm Outside Diameter x 33mm Inside Diameter. 8.5mm thick with a right-hand rotation.

Factory produced grinder burr set. Also available: after-market (cheaper) version, and the "Dura-mill" (higher quality, more expensive) versions.

SOME CUSTOMERS HAVE EXPRESSED THAT THE MOUNTING SCREW HOLES ON THE NON-CARDED VERSION ARE TOO FAR AWAY FROM THE CENTER OF THE BURR, CAUSING THEM TO NOT THREAD IN PERFECTLY (the screw heads outer edge ends up scraping the inside edge of the hole of the burr), BUT THESE WILL WORK

New "Dura-Mill" Titanium Alloy burrs. The Titanium grinder burr set fits Mazzer Super Jolly espresso grinders. This grinder burr set is reputed to grind faster, stay cooler and last 300 to 600% longer.

High Quality Carbon steel burr set for Anfim grinders. Replacing your grinder burrs is an important factor in the pursuit of quality espresso. On average burrs should be replaced every 800-l000.

64mm Outside Diameter x 38mm Inside Diameter x 9mm Thick, three hole, left hand rotation

75mm Anfim Caimano Titanium Replacement Burrs. Sharp Burrs are just one of the keys to quality espresso, and Espressoparts helps make it easy by offering the largest selection of grinder replacement parts.� Espressoparts is pleased to offer genuine Anfim replacement burrs engineered specifically for the Super Caimano.Recent feedback on duration of time between replacement, shows that grind quality starts to flutter around 1000 lbs. of use, and at 1300 lbs. replacment is suggested. Volume disc...

Rancilio Rocky / MD40 / Obel Bregant 50mm espresso grinder burr set. 50mm OD X 31mm ID X 8 - SX. For Rocky users: the burr mounting screws reportedly get VERY tight and may strip when you try to remove them. You may want to consider purchasing an extra set of six, part number MR_25

64mm Outside Diameter x 38mm Inside Diameter, three hole, left hand rotation

75mm Outside Diameter x 43mm Inside Diameter 10.5mm thick, three hole, left hand rotation

84mm Outside Diameter x 45mm Inside Diameter, 9mm Thick, Three hole, right hand rotation. For the SM95 Model

64mm Outside Diameter x 38mm Inside Diameter, three hole, right hand rotation

63mm Outside Diameter x 38mm Inside Diameter, three hole, left hand rotation

43mm Outside Diameter x 25mm Inside Diameter, three hole, left hand rotation

49/68mm Outside Diameter x 13/45mm Inside Diameter, 25mm Thick, right hand rotation

Conical Burrs for Innova I1 and I2 model espresso grinders.

Faema MPN 31 X 53 DX Espresso Grinder Burrs. Inner burr set diameter - 31mm, outer burr set diameter - 54mm - 8mm thick, right hand rotation

54mm Outside Diameter x 31mm Inside Diameter. 8mm thick with a left-hand rotation

62mm Outside Diameter x 38mm Inside Diameter. 9mm thick with a left-hand rotation

59mm Outside Diameter x 33mm Inside Diameter, 9.5mm thick, three hole, left hand rotation

59mm Outside Diameter x 30/33mm Inside Diameter, 9mm thick, three hole (on the upper burr - the lower burr is held in place with a nut and washer), left hand rotation

Nuova Simonelli MCF Two Hole Grinder Burrs. 47 x 29.5 x 6.5mm right-hand rotation. Two mounting screw holes

Nuova Simonelli Three Hole Grinder Burrs. 50 x 30 x 7.5mm right-hand rotation

One set of ceramic burrs for the La Marzocco Swift espresso grinder.